
|
CIN1S Central used in system for smoke and
fire/flame detection and hot temperature detection system
with a maximum of 40 detectors that works on the
principle of the difference of power absorption.
Two indipendent alarm lines connected following the
principle of the "twin contacts" .
Five relais with terminals free of potential 250V 10A
used as:
line alarm 1
line alarm 2
general alarm (works only in simultaneous alarm from both
line or any line)
power off (works for a programmable time in continuity
from 1 to 100 from the simultaneous alarm
from both line)
anomalies (works if a line is interrupted or in close
circuit and, if the user wants it, for power losses).
Exclusion selector of the two indipendent line.
Line reset switch under the lock that can disconnect the
power to the two alarm line.
Electromechanical security lock for alarm reset and line
reset abilitation.
Internal line test switch.
Possible exclusion of line's terminals.
Manual power off terminals.
24V terminal outputs.
Integrated feeder 27,6V 1,5A stabilized and protected
against voltage change, input spikes and great absorption
variation.
Pleasant cabinet in painted plate of mm. 1,5.
External size mm. 220x290x135.
Total weight Kg. 4.
|