| |
VIGILANT
The VIGILANT series is a very modern way to
intend the security when we speak of alarms control and
management. It exceeds the old standards of traditional
control panels and joins flexibility and employment
simplicity. It is based on a microprocessor structure
working on a 2 wire serial bus. It allows the control of
8 alarm lines (16 on VIGILANT 1616) and 8 radio channels
(16 on VIGILANT 816 and 1616). All is controlled by one
or more EASYPAD microprocessor based control terminals or
by one or more PKR proximity readers, able to read the
PROXYKEY proximity keys and the PROXYCARD proxymity
badges.
VIGILANT is completely programmable thanks to its
built-in keyboard. With the same keyboard, is also
possible to activate or deactivate the control panel.
Some of the
VIGILANT main characteristics:
8 alarm lines, one normally closed and 7 programmable as
normally closed or double balancement (16 on VIGILANT
1616 all double balancement).
Two relay alarm outputs for the 12V self powered and
normal sirens.
6 open collector outputs connectables with the control
panel functions and the alarm lines and changeables in
relay outputs thanks to the EUR serie relay boards.
Serial interface RS485 for the connection of all
peripherals (2 power and 2 data wires).
Management of programmer and master codes and other 58
codes.
Total programming of every line in direct, delayed, 24hr
and delayed-following, with autoexclusion for alarms
number, with courtesy signal, single shot, automatic line
activation autoexclusion, partial alarm, etc.
Three different programmable sectors with programmable
line matching.
Alarms memory, zone controls, system state, power state
readables on the control panel or on the EASYPAD
terminals with clear leds signals.
Programming data on write-protected, non-volatile memory.
Manageable with numeric codes, proximity keys, proximity
badges, radio remote controls, external keys, also on the
same time.
Radio management functions: code autolearning,
antimasking, false code detection, sectorized activation,
low battery signals, supervision, radiocheck, etc.
Output signals for: main power absence, low batteries,
false codes, partial alarm, terminal tamper, tamper and
un-balancing on the balanced lines, etc
Software upgrade possibility without components
removal.
Smart policarbonate or steel case with tamper (optional
anti-removal protection).
|
|
Job
Production
Detectors
CCTV
Installer
