About us

Branch

Map

Concessionary area

SELECTIVE MICROPHONE - GLASS BREAKING DETECTORS

MSEL
Selective microphone for the protection of caveau, safes, cashes, wall, ecc. Detect mechanical attacks to the object where it is installed.

Useful range from 3 mt to 14 mt (it depends from the object structure)
Sensitivity adjust
9-15 Vdc power supply
9 mA stand by current
Dimensions mm. 100 x 80 x 30

Double tecnology glass break detector. Installed next to the protected glasses, it detects the frequencies and the vibrations caused by the break and it goes in allarm only when both are detected. Ideal for shops, museum, exibitions. Function M.I.C. – Memory Image Comparison, alarm input memory. 

Useful range up to 14mt
Glass type all type
Glass dimensions 30x30 cm
Power supply 8-16 Vcc
Current consumption 14 mA at 12V
Alarm output N.C. 0.1A/24V Max
Tamper N.O.
Alarm time 2 sec.
Indications led Red=alarm Green=receive
Test mode DIP 2
Temperature -10°~60°C
Umidity 95% Max

Glass break detector for all the glass type: laminated, tempered, reinforced, etc. Microprocessor based control on the characteristic glass break noise.

Automatic sensitivity control to reduce to the minimum the false alarm.

Glass type all type
Glass dimensions 30x30 cm
Power supply 8-15 Vdc
Current consumption 5mA 12V
Alarm output N.C.
Tamper N.C.
Temperature -10°~50°C

 home     about us     branch   map    concessionary area   job     production     detectors     cctv     installer